Our Roofing Services | Goree, TX
We don't do a little of everything. We do roofing. That specialization is why we can offer manufacturer certifications and the best warranties available to Goree homeowners.
Roof Replacement
Owens Corning Duration with SureNail technology or CertainTeed Landmark with NailTrak for reliable fastening in high-wind zones. Both meet ASTM D3462 and carry Class A fire ratings per UL 790. In Texas, we recommend the high-wind versions rated to ASTM D7158 Class H, which is 130 mph wind warranty. Full system install qualifies for Owens Corning Preferred Protection or CertainTeed SureStart Plus warranty.
Get a Free Quote →
Roof Repair
We repair asphalt shingle, metal, flat membrane, and tile roofs. Our trucks carry common repair materials so most fixes happen same-visit. Shingle repairs, flashing replacement, pipe boot swaps, ridge cap fixes, valley re-flashing. All routine for our Goree crews.
Get a Free Quote →
Storm Damage Repair
After a major storm in Goree, we mobilize quickly. Emergency tarping within 24 hours to prevent secondary water damage. Then a full damage inspection once conditions allow. We use drone photography on larger commercial roofs to document everything the adjuster needs.
Get a Free Quote →
New Roof Installation
We handle new construction from permits through final inspection. Our Goree office coordinates with your builder on scheduling, material delivery, and inspection timing. Typical install time is 1-3 days depending on size and complexity.
Get a Free Quote →
Metal Roofing
Metal roof repairs are usually sealant failures at transitions, loose panels from improper installation, or rust spots on older galvanized systems. Our Goree crew repairs all metal types. Not every issue needs a full replacement. Sometimes a sealant touch-up or panel re-securing solves it.
Get a Free Quote →
Shingle Roofing
Designer shingles like GAF Camelot II, Owens Corning Berkshire, and CertainTeed Grand Manor mimic premium materials. Slate, cedar shake, heavy wood. They cost 30-50% more than standard architectural shingles but the curb appeal is worth it for higher-end Goree homes. Full manufacturer warranties included.
Get a Free Quote →
Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, fully adhered or mechanically attached over minimum R-25 polyiso insulation. Hot-air welded seams tested with a probe at every joint. We install per NRCA and manufacturer specifications with tapered ISO insulation creating minimum 1/4" per foot positive drainage. Ponding water is the number one cause of flat roof failure in Goree. Tapered insulation eliminates it. FM 4473 rated systems available for hail-prone areas. Fully warranted by Carlisle, Firestone, or GAF.
Get a Free Quote →
Commercial Roofing
TPO is our most-installed commercial membrane in Goree. 60-mil thickness, hot-air welded seams, mechanically attached or fully adhered over polyiso insulation. The weld is stronger than the membrane. 15-20 year manufacturer warranties depending on system build-up.
Get a Free Quote →
Gutter Installation
Gutter sizing matters more than most homeowners realize. We calculate the effective roof area, local rainfall intensity, and the number of downspout outlets needed to handle peak flow. Undersized gutters overflow. Undersized downspouts back up. We size everything to handle Goree's worst rain.
Get a Free Quote →
Roof Inspection
Our inspection covers the roof and the attic. From the attic, we check for daylight through the roof deck, moisture stains on rafters, mold on sheathing, and ventilation function. Problems in the attic often indicate roof issues that aren't visible from the surface.
Get a Free Quote →
Emergency Roof Repair
Emergency tarping is step one. Stop the water. We secure heavy-duty poly tarps over the damaged area using 2x4 nailer boards attached to the deck. Once the immediate threat is contained, we schedule the permanent repair within 48-72 hours.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →